Light hose for steam discharge
patented
New product to be replaced with canvas hose
Two types of hoses are available: blue and green with different number of injection holes.
- Lightweight plastic material makes it possible to steam the longer area compared to canvas hoses.
- Because there is no risk of corrosion as it is a chemical product, it is possible to put it in storage immediately after steaming.
- It is easy to wind up the hose after steaming, as it is light-weighted.
- The unit price is low: approx. 1/7 of that of canvas hose.
- The strength of the folded sides is increased. In addition, side reinforcement is applied for easier winding for storage.
Selection guide
| Model | Total length of ridge to be steamed |
|---|---|
| SB-650 | Green (with many injection holes) ←or shorter 60m or longer→ Blue (with standard injection holes) |
| SB-550 | Green (with many injection holes) ←or shorter 45m or longer→ Blue (with standard injection holes) |
| SB-400 | Green (with many injection holes) ←or shorter 35m or longer→ Blue (with standard injection holes) |
| SB-300 | Green (with many injection holes) ←or shorter 25m or longer→ Blue (with standard injection holes) |
| SB-200 | Green (with many injection holes) ←or shorter 20m or longer→ Blue (with standard injection holes) |
| SB-150 | Green (with many injection holes) ←or shorter 15m or longer→ Blue (with standard injection holes) |
note:
- Due to consentlated steam injection from injection holes, covering sheet may be partially damaged.
- The hose life on the whole may be shorter than that of canvas hose.
- Avoid direct sunlight while in storage.
- Light hose is an original product of our company. Beware of imitations.